Belcher, Dennis. (2019). The Basics of Workholding. American Woodturner, 34(6), 20-26.
https://www.woodturner.org/common/Uploaded%20files/AmericanWoodturner/AW2010s/AW3406-2019.pdf
  • Requires membership with American Association of Woodturners (AAW).
Cohen, Andy. (2000). Automotive Gizmo Makes Low Cost Chuck. American Woodturner, 15(4), 23.
https://www.woodturner.org/common/Uploaded%20files/AmericanWoodturner/AW2000s/AW1504-2000.pdf
  • Requires membership with American Association of Woodturners (AAW).
Delehanty, Denis. (2016). Wood Drives. Woodturning FUNdamentals, 5(1), 15-18.
https://www.woodturner.org/common/Uploaded%20files/WoodFunPub/WF0501-2016.pdf
  • Requires membership with American Association of Woodturners (AAW).
Duxbury, Jim. (2010). Tapping Tool for Turners. American Woodturner, 25(6), 18-21.
https://www.woodturner.org/common/Uploaded%20files/AmericanWoodturner/AW2010s/AW2506-2010.pdf
  • Requires membership with American Association of Woodturners (AAW).
Ellsworth, David. (2015). Roughing Between Centers. American Woodturner, 30(6), 25.
https://www.woodturner.org/common/Uploaded%20files/AmericanWoodturner/AW2010s/AW3006-2015.pdf
  • Requires membership with American Association of Woodturners (AAW).
Grimm, Tom. (2021). Creative Workholding Solution. American Woodturner, 36(4), 45.
https://www.woodturner.org/common/Uploaded%20files/AmericanWoodturner/AW2020s/AW3604-2021.pdf
  • Requires membership with American Association of Woodturners (AAW).
Lucas, John. (2013). Methods & Jigs for Reverse Turning Bowls. Woodturning FUNdamentals, 2(1-6), 8-14.
https://www.woodturner.org/common/Uploaded%20files/WoodFunPub/WF0201-2013.pdf
  • Requires membership with American Association of Woodturners (AAW).
Mueller, David. (2015). Build a Shopmade Chuck for Offset Turnings. American Woodturner, 30(1), 35-40.
https://www.woodturner.org/common/Uploaded%20files/AmericanWoodturner/AW2010s/AW3001-2015.pdf
  • Requires membership with American Association of Woodturners (AAW).
Newman, Ernie. (2022). Shopmade Chuck Jigs. Woodturning FUNdamentals, 11(3), 34-39.
https://www.woodturner.org/common/Uploaded%20files/WoodFunPub/WF1103-2022.pdf
  • Requires membership with American Association of Woodturners (AAW).
Palma, Mark F. (2022). Safer Spindle Driving. Woodturning FUNdamentals, 11(2), 28-30.
https://www.woodturner.org/common/Uploaded%20files/WoodFunPub/WF1102-2022B.pdf
  • Requires membership with American Association of Woodturners (AAW).
Peace, Mike. (2015). Turn the Knob. American Woodturner, 30(1), 24-27.
https://www.woodturner.org/common/Uploaded%20files/AmericanWoodturner/AW2010s/AW3001-2015.pdf
  • Requires membership with American Association of Woodturners (AAW).
Springett, David. (2015). Elliptical Turning on a Shopmade Chuck. American Woodturner, 30(6), 28-35.
https://www.woodturner.org/common/Uploaded%20files/AmericanWoodturner/AW2010s/AW3006-2015.pdf
  • Requires membership with American Association of Woodturners (AAW).
Videos
Jamieson, Lyle
Mounting Wood Blanks on a Lathe
Duration: 00:04:08
https://www.youtube.com/watch?v=b4xIHTS0yJc&feature=youtu.be
​
Peace, Mike
Holding Wood on a Lathe
Duration: 01:28:33
https://www.youtube.com/watch?v=aUXil-5dEeo&context=C4bc1c19ADvjVQa1PpcFOY6EgFpBTHQhPalM_xSaQF1NubJI0NSJ0
​
Peace, Mike
How to Hold Small Blanks on the Lathe
Duration: 00:02:56
https://www.youtube.com/watch?v=5vAm3PO87fI
​
Waldt, Mike
Finialed Sphere and Stand
  • Sphere jig
Duration: 00:10:01
https://www.youtube.com/watch?v=L8CPpdn1jRE
​