AAW. (2018). Grain Direction on the Lathe. Woodturning FUNdamentals, 7(4), 5.
https://www.woodturner.org/common/Uploaded%20files/WoodFunPub/WF0704-2018.pdf
  • Requires membership with American Association of Woodturners (AAW).

​Christensen, Kip. (2016). Ten Principles of Clean Cutting. American Woodturner, 31(1), 14-19.
https://www.woodturner.org/common/Uploaded%20files/AmericanWoodturner/AW2010s/AW3101-2016.pdf
  • Requires membership with American Association of Woodturners (AAW).
Cook, Nick. (2006). Twenty Ways to Not Turn a Bowl. American Woodturner, 21(1), 12-17.
https://www.woodturner.org/common/Uploaded%20files/AmericanWoodturner/AW2000s/AW2101-2006.pdf
  • Requires membership with American Association of Woodturners (AAW).
Dickerman, Wally. (2015). Serious Bowl Busting Catches. Woodturning FUNdamentals, 4(6), 18-19.
https://www.woodturner.org/common/Uploaded%20files/WoodFunPub/WF0406-2015.pdf
  • Requires membership with American Association of Woodturners (AAW).
Ellsworth, David. (2019). Whittle and Dance to Avoid Catches. American Woodturner, 34(3), 18-20.
https://www.woodturner.org/common/Uploaded%20files/AmericanWoodturner/AW2010s/AW3403-2019.pdf
  • Requires membership with American Association of Woodturners (AAW).
Hatfield, George. (1999). The Cutting Process. American Woodturner, 14(2), 18-20.
https://www.woodturner.org/common/Uploaded%20files/AmericanWoodturner/AW1990s/AW1402-1999.pdf
  • Requires membership with American Association of Woodturners (AAW).
Hertzog, Kurt. (2013). Lathe Speed: How Fast Should I Run My Lathe?. Woodturning FUNdamentals, 1(1-6), 15.
https://www.woodturner.org/common/Uploaded%20files/WoodFunPub/WF0101-2012.pdf
  • Requires membership with American Association of Woodturners (AAW).
Jacobs, Rodger. (1998). Get a Grip. American Woodturner, 13(2), 16-18.
https://www.woodturner.org/common/Uploaded%20files/AmericanWoodturner/AW1990s/AW1302-1998.pdf
  • Requires membership with American Association of Woodturners (AAW).
Jamieson, Lyle. (2006). Woodturner’s Fear Factor. American Woodturner, 21(4), 60-63.
https://www.woodturner.org/common/Uploaded%20files/AmericanWoodturner/AW2000s/AW2104-2006.pdf
  • Requires membership with American Association of Woodturners (AAW).
Jamieson, Lyle. (1996). Five Ways to Avoid a Catch. American Woodturner, 11(1), 24-25.
https://www.woodturner.org/common/Uploaded%20files/AmericanWoodturner/AW1990s/AW1101-1996.pdf
  • Requires membership with American Association of Woodturners (AAW).
Lacer, Alan. (2004). Speed Zone. American Woodturner, 19(1), 16-17.
https://www.woodturner.org/common/Uploaded%20files/AmericanWoodturner/AW2000s/AW1901-2004.pdf
  • Requires membership with American Association of Woodturners (AAW).
Lucas, John. (2018). Push Cut or Pull Cut. Woodturning FUNdamentals, 7(1), 36-37.
https://www.woodturner.org/common/Uploaded%20files/WoodFunPub/WF0701-2018.pdf
  • Requires membership with American Association of Woodturners (AAW).
Nittmann, David. (2006). Pleasing Profiles: Combining Three Woodturner Cuts. American Woodturner, 21(3), 24-25.
https://www.woodturner.org/common/Uploaded%20files/AmericanWoodturner/AW2000s/AW2103-2006.pdf
  • Requires membership with American Association of Woodturners (AAW).
Wirsing, Tom. (2022). Tips for Turning Figured Woods. American Woodturner, 37(5), 35-37.
https://www.woodturner.org/common/Uploaded%20files/AmericanWoodturner/AW2020s/ALL_AAWOCT22.pdf
  • Requires membership with American Association of Woodturners (AAW).
Witek, Werner. (2014). Removing Dimples from the Center. Woodturning FUNdamentals, 3(5), 25-26.
https://www.woodturner.org/common/Uploaded%20files/WoodFunPub/WF0305-2014.pdf
  • Requires membership with American Association of Woodturners (AAW).
Videos
Batty, Stuart
7 Fundamentals: Finishing Cut Demonstration
Duration: 00:03:16
https://vimeo.com/68642333
​
Jamieson, Lyle
Bevel Supported Tool Control Inside a Natural Edge Bowl
Duration: 00:08:35
https://www.youtube.com/watch?v=HV9C7O0wUjU&feature=youtu.be
​
Jamieson, Lyle
Tool Control with the Push Cut
Duration: 00:07:27
https://www.youtube.com/watch?v=1HF9IGdHCTA&feature=youtu.be
​
Lofstrom, Erik
Biomechanics and Body Movement at the Lathe, with Eric Lofstrom
Duration: 24:38
https://vimeo.com/261409643
​